pncconf 2.8

PCW
Offline
Moderator

5 years 9 months ago #195363 by PCW

Replied by PCW on topic pncconf 2.8

a couple errors:

#setp pid.x.error-previous-target true
this should not be commented out (for any axis)

and
on Joint 0, you have

FF1 = 0
this must be
FF1 = 1

Please Log in or Create an account to join the conversation.

Jabbery
Offline
Junior Member

5 years 9 months ago #195396 by Jabbery

Replied by Jabbery on topic pncconf 2.8

Thank you that solved that problem.

Please Log in or Create an account to join the conversation.

Moderators: cmorley

Time to create page: 0.612 seconds