- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- 7i92 7i76 7i88 Hostmot2 Basic Orientation, Syntax & Assignment
7i92 7i76 7i88 Hostmot2 Basic Orientation, Syntax & Assignment
- garrettmin
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 60
- Thank you received: 0
06 Apr 2022 17:12 - 06 Apr 2022 18:16 #239454
by garrettmin
Replied by garrettmin on topic 7i92 7i76 7i88 Hostmot2 Basic Orientation, Syntax & Assignment
Verifying now the HBS57H Wiring
HBS57H to Encoder
HBS57H to Motor
HBS57H to 7i76
Results of HBS57H Wiring Check:
Position Following RED LED Occurs:
Both Common Anode / Cathode Wiring Schemes
HBS57H to Encoder
HBS57H to Motor
HBS57H to 7i76
Results of HBS57H Wiring Check:
Position Following RED LED Occurs:
Both Common Anode / Cathode Wiring Schemes
Last edit: 06 Apr 2022 18:16 by garrettmin.
Please Log in or Create an account to join the conversation.
- garrettmin
- Topic Author
- Offline
- Senior Member
Less
More
- Posts: 60
- Thank you received: 0
13 Apr 2022 18:38 #240173
by garrettmin
Replied by garrettmin on topic 7i92 7i76 7i88 Hostmot2 Basic Orientation, Syntax & Assignment
While a Mesa Novice, I presumed the Entire FPGA would be addressed "Per Address of Each Card". I could not declare the 7i76 StepGen SPECIFICALLY. the 7i76 StepGen declaration was completley missing from LCNC PNCCONF HAL. Weeks I could not understand why there was not any kind of declaration for the StepGens on any of the Daughter Boards...
Eventually I learned the FPGA & all the Daughter Boards are seen by LCNC as "One entire Computer" and not "Individual Little Computers".
Eventually I learned the FPGA & all the Daughter Boards are seen by LCNC as "One entire Computer" and not "Individual Little Computers".
Please Log in or Create an account to join the conversation.
Moderators: cmorley
- Configuring LinuxCNC
- Configuration Tools
- PnCConf Wizard
- 7i92 7i76 7i88 Hostmot2 Basic Orientation, Syntax & Assignment
Time to create page: 0.065 seconds