Axis scale calculation

More
02 Apr 2024 20:17 #297457 by Ahmed.emara
Axis scale calculation was created by Ahmed.emara
Hello guys I would like to set my motor steps per revolution here in axis scale calculation to 10,000 but the software limits the value to 1000, is there is a way to unlock the limit or it’s the maximum value for this parameter in pnconfig
Attachments:

Please Log in or Create an account to join the conversation.

More
03 Apr 2024 01:47 #297477 by cmorley
Replied by cmorley on topic Axis scale calculation
set the micro step setting to 10

10x1000 = 10000

10000 steps seems super high.

Please Log in or Create an account to join the conversation.

More
03 Apr 2024 02:11 #297478 by PCW
Replied by PCW on topic Axis scale calculation
That is the number of full steps per turn (almost always 200)
If you have 10000 usteps per turn you would leave the steps per
revolution at 200 and set the microstep  multiplication factor to 50

Please Log in or Create an account to join the conversation.

Moderators: cmorley
Time to create page: 0.097 seconds
Powered by Kunena Forum