Working with LinuxCNC after 2.000 hours

More
22 Feb 2014 22:07 #44069 by ghislain.vdwalle
It is about a year now that we installed LinuxCNC on our Norte VMC.
We just passed 2.000 working hours.
We fabricate moulds & large complex parts on the machine.
To our satisfaction we encountered NO glitches in LinuxCNC; none, zero.
Our former "Zombie CNC with the old Sinumerik" became a tame and handy machine everyone likes.

One particular & important feature on behalf of the operator in the GUI is that the X and Y tool path measurements are shown when entering a G-code.ngc file.
Using this feature, we divide a complex form or part in multiple subpgms, checking the X & Y tool path measurements for each pgm.
Doing so prevents programming errors in many occasions.
Considering a complex & unique part you have to mill, you only get ONE shot to get it right or you can trash the part.

Thank you LinuxCNC.org
The following user(s) said Thank You: BigJohnT, jtc

Please Log in or Create an account to join the conversation.

More
23 Feb 2014 08:46 #44074 by cmorley
lol I guess your in Europe.. 2.000 hours in Canada mean two hours not two thousand :0

That's great to hear - good testimony to linuxcnc.

Have you posted video?

Chris M

Please Log in or Create an account to join the conversation.

More
24 Feb 2014 14:52 #44104 by ghislain.vdwalle
Yes, our workshop is in Belgium.

Video clip can be found on:http://www.youtube.com/watch?v=mLBgdYCgyGw

Please Log in or Create an account to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum