problem with usb flash memory

More
17 May 2019 11:12 #134041 by FOUZI
hello everyone
I'm new in linuxcnc and have many problems. one of it is usb flash memory (pen drive) i cant open it on linuxcnc but when open windows it is working good.
I tried some video one youtube but it dose not work.
Please help .
thank you all.

Please Log in or Create an account to join the conversation.

More
17 May 2019 11:23 #134043 by pl7i92
sudo apt-get install exfat-utils exfat-fuse

this will fix it
The following user(s) said Thank You: FOUZI

Please Log in or Create an account to join the conversation.

More
18 May 2019 08:49 #134111 by FOUZI
Replied by FOUZI on topic problem with usb flash memory
It's still not working !

Please Log in or Create an account to join the conversation.

More
18 May 2019 08:59 #134114 by pl7i92
Hi
please let us Hnow hat system You are on
Ubuntu ,Mint, Debian ....
Version like 18.04 wheezy bionic ....

in terminal
uname -a

that woudt help us to get you to the problem
There is also a live Helpchannel for the linux of your system on IRC
that brings you forward

and some Sticks are not compatible with linux
even if they are formated on linux

Please Log in or Create an account to join the conversation.

More
18 May 2019 09:36 #134132 by FOUZI
Replied by FOUZI on topic problem with usb flash memory
I am on linuxcnc2.7.14

Please Log in or Create an account to join the conversation.

More
18 May 2019 09:46 #134140 by pl7i92
that info is for the Programm
not the Operation System

As You are windows wie talk about Win98se/WinXP/Vista/7-10

so your info is not the info needed

Please Log in or Create an account to join the conversation.

Time to create page: 0.080 seconds
Powered by Kunena Forum