Replacing OpenPNP motion controller

More
12 Jun 2020 01:20 #171200 by my1987toyota
dm17ry. Perhaps a fork from LinuxCNC? LinuxPnP? Those video's look great by the way. I have a PnP at work that I am trying to convert to OpenPnP , unfortunately the recommended motion controller (Smoothie Board) is hard to come by right now . Too bad I don't know near enough about Linuxcnc yet.

Please Log in or Create an account to join the conversation.

More
13 Jun 2020 11:05 #171401 by dm17ry
thanks. my project is nowhere near as comprehensive as OpenPNP and i seriously doubt i will have resources to make it evolve into something usable by others. still need a few essential things to add to my machine. when i finally make the hardware maybe i will get some inspiration to continue with the software. will see. :) for now, the code i use is on the github at github.com/yur7aev/linuxpnp
not sure if it is of any use for anyone though :)

Please Log in or Create an account to join the conversation.

More
13 Jun 2020 11:58 #171410 by bbsr_5a
the smoothie bord is only 4parports so you can do that with a simple 7i96 or 7i92+BOB
or as the smoothie also only ads pins no axis use the 7i76e to get your pins

Please Log in or Create an account to join the conversation.

More
25 Jul 2020 02:57 #175707 by my1987toyota
dm17ry if you want to see another PnP machine not using OpenPnP check out my build in the Show your stuff section. Look for Manncorp ECM93 Pick and Place.

Please Log in or Create an account to join the conversation.

More
25 Jul 2020 18:04 #175768 by dm17ry
yep, subscribed to your topic. and sure, if you happen to find anything useful in my code - feel free to use it..
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds
Powered by Kunena Forum