Forum Menu

Probe Basic

More
2 years 7 months ago #297380 by tommylight
Replied by tommylight on topic Probe Basic
Yes it could be, so try installing it again, but be very careful to use "sudo" only when it says so.
And never use "sudo -i" or "su".

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297432 by OldSQL
Replied by OldSQL on topic Probe Basic
Yes, SIM works well, but when I migrate a functional config it won't launch. Can even load the hal components.

Install PB again.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297436 by tommylight
Replied by tommylight on topic Probe Basic
If sim works, there is probably something amiss with the editing/adding your config, but very hard to pin point without more info.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297439 by OldSQL
Replied by OldSQL on topic Probe Basic
Debug file information:

Note: Using POSIX realtime
2557
2605
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime

Always this problem...

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297446 by tommylight
Replied by tommylight on topic Probe Basic

Debug file information:

Note: Using POSIX realtime
2557
2605
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime

Always this problem...
That is not the problem, see debug section.

Please Log in or Create an account to join the conversation.

More
2 years 6 months ago #297454 by OldSQL
Replied by OldSQL on topic Probe Basic
I reinstall PB and it's now working well.
Thanks!

One more question: it's possible to made a atc working with stepper motor index way?

Thanks

Please Log in or Create an account to join the conversation.

Time to create page: 0.074 seconds
Powered by Kunena Forum