Lockfile still not removed
07 Apr 2023 20:11 #268544
by wl
Lockfile still not removed was created by wl
Hallo, wenn ich versuche LinuxCnc über den Launcher zu starten wird der Axis screen nicht angezeigt, das Programm läuft allerdings.
Und dann passiert nichts mehr...
Wäre nett wenn mir wer dabei helfen könnte
wl@wolfgang:~$ linuxcnc
LINUXCNC - 2.8.4-1-gb7824717b
Machine configuration directory is '/home/wl/linuxcnc/configs/sim.axis'
Machine configuration file is 'axis.ini'
LinuxCNC is still running. Restart it? [Y/n] Y
Cleaning up old LinuxCNC...
Shutting down and cleaning up LinuxCNC...
Waiting for other session to finish exiting...lockfile still not removed
Wäre nett wenn mir wer dabei helfen könnte
Please Log in or Create an account to join the conversation.
- tommylight
- Away
- Moderator
Less
More
- Posts: 18757
- Thank you received: 6306
07 Apr 2023 20:27 #268546
by tommylight
Replied by tommylight on topic Lockfile still not removed
Im terminal:
halrun -U
Muss die grosse U sein am ende.
halrun -U
Muss die grosse U sein am ende.
Please Log in or Create an account to join the conversation.
07 Apr 2023 20:40 #268547
by wl
Replied by wl on topic Lockfile still not removed
Da passiert leider gar nichts
Please Log in or Create an account to join the conversation.
- tommylight
- Away
- Moderator
Less
More
- Posts: 18757
- Thank you received: 6306
07 Apr 2023 21:23 #268552
by tommylight
Replied by tommylight on topic Lockfile still not removed
Die selbe nach reboot?
Please Log in or Create an account to join the conversation.
07 Apr 2023 22:03 #268555
by wl
Replied by wl on topic Lockfile still not removed
Nach dem reboot kann ich den Befehl ausführen. Aber wenn ich dann wieder den launcher klicke erscheint wieder kein Axis Screen.
Please Log in or Create an account to join the conversation.
08 Apr 2023 11:35 #268599
by wl
Replied by wl on topic Lockfile still not removed
Please Log in or Create an account to join the conversation.
Time to create page: 0.143 seconds