Forum Menu

Linuxcnc meeting in Stuttgart

More
3 years 4 weeks ago - 3 years 4 weeks ago #282065 by meister
Replied by meister on topic Linuxcnc meeting in Stuttgart
Hi leute,
würde mich auch interessieren wie das so abläuft.

Gruß,
Olli

PS: könnte auch ein RIO board mitbringen, falls mal jemand mit spielen möchte :)
Last edit: 3 years 4 weeks ago by meister.
The following user(s) said Thank You: Muecke

Please Log in or Create an account to join the conversation.

More
3 years 4 weeks ago #282283 by AlexMagToast
Replied by AlexMagToast on topic Linuxcnc meeting in Stuttgart

What's the weather like in Stuttgart in November?
It's an indoor event, but we have previously had a fair bit of outdoor tomfoolery.
@andypugh is there a chance to meet you on Friday, 6.10?
 

Please Log in or Create an account to join the conversation.

More
3 years 4 weeks ago #282286 by rene-dev
Replied by rene-dev on topic Linuxcnc meeting in Stuttgart
von Freitag bis Sonntag geht das Event. Es ist rund um die Uhr geöffnet. Es findet in einer Werkstatt statt.
The following user(s) said Thank You: meister, Muecke

Please Log in or Create an account to join the conversation.

More
3 years 3 weeks ago #282334 by Muecke
Replied by Muecke on topic Linuxcnc meeting in Stuttgart
Ich versuche, am Freitagabend zu kommen.

Please Log in or Create an account to join the conversation.

More
3 years 3 weeks ago #282636 by Muecke
Replied by Muecke on topic Linuxcnc meeting in Stuttgart
Auch wenn ich nur kurz vorbeischauen konnte, hat es mich gefreut.
Die Bobby-Cars waren sehr lustig.

Gruß Mücke ;-)

Please Log in or Create an account to join the conversation.

Moderators: Muecke
Time to create page: 0.193 seconds
Powered by Kunena Forum