Call state of G54/G5x / G90/91

More
20 Sep 2012 16:12 #24475 by eszyman
Is it possible to call the state of various gcode interpreters?
For instance I want a gladeVCP led to show if I am in 90 or G91
Or if I am in G54 or G55?

for instance in my postgui.hal what would I net to?
net g54-active gladevcp.hal_led1 <= ???

Please Log in or Create an account to join the conversation.

More
20 Sep 2012 16:17 #24477 by mhaberler
eszyman wrote:

Is it possible to call the state of various gcode interpreters?
For instance I want a gladeVCP led to show if I am in 90 or G91
Or if I am in G54 or G55?

for instance in my postgui.hal what would I net to?
net g54-active gladevcp.hal_led1 <= ???


Not yet. There is currently a patch under review which will enable guis like GladeVCP to access interpreter parameters: git.mah.priv.at/gitweb/emc2-dev.git/shor...s/heads/redis-params

If you feel confident building from source with this patch I actually would appreciate feedback on the emc-developers mailing list; it will make it faster to the master branch then.

- Michael

Please Log in or Create an account to join the conversation.

More
20 Sep 2012 16:25 #24480 by eszyman
Another good reason to build from source, I will let you know if and when I attempt it.

Please Log in or Create an account to join the conversation.

Moderators: HansU
Time to create page: 0.064 seconds
Powered by Kunena Forum