installation of glade-gtk2
- trilobyte
- Offline
- Premium Member
-
Less
More
- Posts: 96
- Thank you received: 5
24 Dec 2018 11:20 - 24 Dec 2018 11:42 #122821
by trilobyte
installation of glade-gtk2 was created by trilobyte
Hi
I'm using the debian stretch testing image:
www.linuxcnc.org/testing-stretch-rtpreempt/
i tryed to install glade with gtk2 as described in:
linuxcnc.org/docs/devel/html/gui/gladevc...adevcp:prerequisites
apt-get install glade-gtk2 -> could not find "glade-gtk2"
if i try to install glade with "apt-get install glade" i get the new glade version 3.20. this version uses gtk3 which isn't compatible to the glade samples provide with linuxcnc.
how can i get an old 3.8 version with gtk?
br
peter
I'm using the debian stretch testing image:
www.linuxcnc.org/testing-stretch-rtpreempt/
i tryed to install glade with gtk2 as described in:
linuxcnc.org/docs/devel/html/gui/gladevc...adevcp:prerequisites
apt-get install glade-gtk2 -> could not find "glade-gtk2"
if i try to install glade with "apt-get install glade" i get the new glade version 3.20. this version uses gtk3 which isn't compatible to the glade samples provide with linuxcnc.
how can i get an old 3.8 version with gtk?
br
peter
Last edit: 24 Dec 2018 11:42 by trilobyte.
Please Log in or Create an account to join the conversation.
- cmorley
- Offline
- Moderator
-
Less
More
- Posts: 7760
- Thank you received: 2055
24 Dec 2018 20:45 #122837
by cmorley
Replied by cmorley on topic installation of glade-gtk2
Please Log in or Create an account to join the conversation.
- trilobyte
- Offline
- Premium Member
-
Less
More
- Posts: 96
- Thank you received: 5
24 Dec 2018 21:29 #122844
by trilobyte
Replied by trilobyte on topic installation of glade-gtk2
Please Log in or Create an account to join the conversation.
- Grotius
-
- Offline
- Platinum Member
-
Less
More
- Posts: 2239
- Thank you received: 1956
25 Dec 2018 01:04 #122853
by Grotius
Replied by Grotius on topic installation of glade-gtk2
See attachment how to install glade for 32 and 64 bit session's.
Good luck to everyone !
Good luck to everyone !
The following user(s) said Thank You: JetForMe, Wieser
Please Log in or Create an account to join the conversation.
Moderators: HansU
Time to create page: 0.060 seconds