Forum Menu

master 2.9 + glade no linuxcnc widgets / tools loading?

More
4 years 7 months ago #238118 by andypugh
Replied by andypugh on topic master 2.9 + glade no linuxcnc widgets / tools loading?

I don't know where to look to check what linuxcnc installs where when it does a deb install of master to report an issue on github / more importantly a fix.

One answer is probably a symlink from usr/shar/glade to usr/share/glade3

So it doesn't matter.
 

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #238120 by tommylight
Replied by tommylight on topic master 2.9 + glade no linuxcnc widgets / tools loading?

I don't know where to look to check what linuxcnc installs where when it does a deb install of master to report an issue on github / more importantly a fix.
Click on the button the mouse is over:

You get a list of every file and where it will be copied:
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #238123 by robertspark
Replied by robertspark on topic master 2.9 + glade no linuxcnc widgets / tools loading?
how do you get that window up as I just use dpkg -i when I've built the debs to install them.

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #238126 by tommylight
Replied by tommylight on topic master 2.9 + glade no linuxcnc widgets / tools loading?
Gdebi.
I would not advise using DPKG to install stuff, it does not take care of some dependencies that Gdebi does, so might leave with an unusable system.
If it is not installed, use :
sudo apt-get install gdebi
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc
The following user(s) said Thank You: robertspark

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #248120 by sqmathlete
Replied by sqmathlete on topic master 2.9 + glade no linuxcnc widgets / tools loading?
Hi,

I am having the same problem with Master 2.9 RIP only installation. As instructed I installed Glade  3.38.2, then ran the . ./scripts/rip-environment before opening glade. Glade opens up but no widgets are available. Since this is a RIP installation only at this point the /usr/share/glade3 file does not exist and therefore the contents cannot be copied to /usr/share/glade file to share the widgets.

I am thinking I might need to do something similar to this older thread
forum.linuxcnc.org/48-gladevcp/31767-gla...the-catalog?start=10
but you would use python3 instead of  python2.7.  However, for some reason I see a python2.7 file in /user/lib that probably shouldn't exist...is this generated by the rip script?

I don't mind if the widgets are installed system wide but if I can get it to run in place that would be ideal.

Dan

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #248121 by sqmathlete
Replied by sqmathlete on topic master 2.9 + glade no linuxcnc widgets / tools loading?
Output in the terminal
Code:
(glade:32481): GladeUI-WARNING **: 09:36:00.484: Failed to load libgtksourceview-2.0.so: libgtksourceview-2.0.so: cannot open shared object file: No such file or directory (glade:32481): GladeUI-WARNING **: 09:36:00.484: Failed to load external library 'gtksourceview-2.0' for catalog 'gtksourceview' GladeUI-Message: 09:36:00.488: No displayable values for property GtkSourceView::draw-spaces GladeUI-Message: 09:36:00.488: No displayable values for property GtkSourceView::background-pattern GladeUI-Message: 09:36:00.499: No displayable values for property WebKitWebView::camera-capture-state GladeUI-Message: 09:36:00.499: No displayable values for property WebKitWebView::microphone-capture-state GladeUI-Message: 09:36:00.499: No displayable values for property WebKitWebView::display-capture-state GladeUI-Message: 09:36:00.506: Glade needs artwork; a default icon will be used for the following classes:     JogWheel    needs an icon named 'widget-gladevcp-jogwheel'     HAL_HBox    needs an icon named 'widget-gladevcp-hal_hbox'     HAL_CheckButton    needs an icon named 'widget-gladevcp-hal_checkbutton'     HAL_Table    needs an icon named 'widget-gladevcp-hal_table'     etc...

Please Log in or Create an account to join the conversation.

Moderators: HansU
Time to create page: 0.322 seconds
Powered by Kunena Forum