Forum Menu

Setup foam cut machine based on the axis sample

More
10 years 10 months ago - 10 years 10 months ago #67238 by Askjerry
Replied by Askjerry on topic Setup foam cut machine based on the axis sample
@Ferox - Is yours aligned with the XY on one side, and the UV on the other? I got a configuration to work (attached above in prior post) but it has the XY on the bottom and the UV over it... needs to be rotated 90 degrees. I haven't figured that out.

Thanks,
Jerry
Last edit: 10 years 10 months ago by Askjerry.

Please Log in or Create an account to join the conversation.

More
10 years 3 months ago #76993 by jeffgar2000@gmail.com
Replied by jeffgar2000@gmail.com on topic Setup foam cut machine based on the axis sample
Hey Jerry,

Did you ever figure out how to rotate your display so XY is on one side and UV on the other istead of one set on the bottom and one set on the top?

Thanks
Jeff

Please Log in or Create an account to join the conversation.

More
10 years 3 months ago #77025 by Askjerry
Replied by Askjerry on topic Setup foam cut machine based on the axis sample
Nope.
Never did. :dry:

Please Log in or Create an account to join the conversation.

Time to create page: 0.179 seconds
Powered by Kunena Forum