Basic Configuration 882 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
Sample Configurations Topic started 23 Feb 2013 20:14, by BigJohnT Locked Last Post 23 Feb 2013 20:14 by BigJohnT Locked	Replies:0 Views:8847	Last Post by BigJohnT 23 Feb 2013 20:14

Debounce and Base-Thread Help Needed Topic started 23 Jan 2020 18:50, by Mr. Technical Last Post 23 Jan 2020 18:50 by Mr. Technical	Replies:0 Views:8	Last Post by Mr. Technical 23 Jan 2020 18:50
Speed limitation close to software limit by traj planner Topic started 15 Jan 2020 00:56, by Nico2017 Last Post 23 Jan 2020 02:03 by Nico2017	Replies:6 Views:138	Last Post by Nico2017 23 Jan 2020 02:03
STMBL Brake, Power on / Fault behaviour and HAL / INI Topic started 16 Jan 2020 17:18, by ross_dev Last Post 21 Jan 2020 09:20 by ross_dev	Replies:6 Views:211	Last Post by ross_dev 21 Jan 2020 09:20
LinuxCNC Backslash problem Topic started 19 Jan 2020 09:40, by Hugues Last Post 19 Jan 2020 22:28 by phillc54	Replies:6 Views:147	Last Post by phillc54 19 Jan 2020 22:28
Parallel port issues Topic started 18 Jan 2020 19:03, by drew_hamilton Last Post 19 Jan 2020 21:00 by drew_hamilton	Replies:5 Views:118	Last Post by drew_hamilton 19 Jan 2020 21:00
Control of an Omron MX2 VFD via RS485 USB-adaptor Topic started 06 Jan 2020 16:36, by Domsku Last Post 19 Jan 2020 17:52 by Domsku	Replies:9 Views:369	Last Post by Domsku 19 Jan 2020 17:52
2.8, Mesa 7i96, uspace and documentation Topic started 02 Aug 2018 19:38, by ikkuh Last Post 15 Jan 2020 16:46 by tommylight	Replies:8 Views:1374	Last Post by tommylight 15 Jan 2020 16:46
config two motor on gantry axis (Y) to square the machine Topic started 13 Jan 2020 18:46, by rogerxue Last Post 15 Jan 2020 00:47 by andypugh	Replies:8 Views:227	Last Post by andypugh 15 Jan 2020 00:47
sinking or sourcing remote enable kollmorgen drive Topic started 13 Jan 2020 06:09, by Doug Crews Last Post 14 Jan 2020 05:02 by Doug Crews	Replies:3 Views:146	Last Post by Doug Crews 14 Jan 2020 05:02
Linuxcnc always wants to update my INI file Topic started 24 Jul 2019 08:31, by JetForMe Last Post 13 Jan 2020 15:44 by DC67 1 2 3 4	Replies:36 Views:1487	Last Post by DC67 13 Jan 2020 15:44
Can ping but can't flash my 7i92 Topic started 11 Jan 2020 02:20, by Emermogle Last Post 11 Jan 2020 14:22 by PCW	Replies:1 Views:102	Last Post by PCW 11 Jan 2020 14:22
configuring a rotary axis on a CNC Rrouter Topic started 17 Dec 2019 09:52, by aaron Last Post 09 Jan 2020 12:53 by andypugh	Replies:9 Views:432	Last Post by andypugh 09 Jan 2020 12:53
Work with probe Topic started 13 May 2015 14:00, by verser Last Post 03 Jan 2020 03:31 by idea 1 2 3 ... 32	Replies:312 Views:62.2k	Last Post by idea 03 Jan 2020 03:31
Basic GENERAL question about configuration. Plasma... Topic started 31 Dec 2019 17:56, by CNCFred Last Post 01 Jan 2020 07:21 by CNCFred	Replies:4 Views:177	Last Post by CNCFred 01 Jan 2020 07:21
Motor Resonance Topic started 30 Dec 2019 23:00, by CNC32 Last Post 31 Dec 2019 17:54 by CNC32 1 2	Replies:14 Views:289	Last Post by CNC32 31 Dec 2019 17:54
Need help with direction. Topic started 01 Dec 2019 17:23, by jeffie-3 Last Post 31 Dec 2019 16:18 by jeffie-3 1 2	Replies:11 Views:562	Last Post by jeffie-3 31 Dec 2019 16:18
configuration problems mesa 7i96 Topic started 30 Dec 2019 19:46, by CNC32 Last Post 30 Dec 2019 22:29 by CNC32	Replies:2 Views:124	Last Post by CNC32 30 Dec 2019 22:29
Initial setup when using Ethercat--use stepconf, copy an example, or what? Topic started 19 Dec 2019 21:29, by scottlaird Last Post 20 Dec 2019 14:10 by Todd Zuercher	Replies:1 Views:137	Last Post by Todd Zuercher 20 Dec 2019 14:10
How to. 2 or more motors on one axis. Gantry LinuxCNC 2.8 Master Topic started 27 Jul 2017 20:25, by joel0407 Last Post 19 Dec 2019 20:50 by Jalfrezi19 1 2 3 4	Replies:32 Views:7031	Last Post by Jalfrezi19 19 Dec 2019 20:50

Time to create page: 0.205 seconds