Basic Configuration 812 topics

A place to discuss basic configurations like probe input, homing etc.

Subject	Replies / Views	Last Post
program exceeds machine maximum on axis Z Topic started 26 Dec 2018 04:49, by gzcwnk Last Post 26 Dec 2018 18:17 by gzcwnk	Replies:5 Views:394	Last Post by gzcwnk 26 Dec 2018 18:17
Steppers ALL Move in 1 Direction Only (not the usual reasons) Topic started 17 Dec 2018 04:33, by MattR Last Post 18 Dec 2018 04:13 by MattR	Replies:2 Views:240	Last Post by MattR 18 Dec 2018 04:13
Multiple home switches on one input - SOLVED Topic started 10 Dec 2018 17:39, by jools Last Post 16 Dec 2018 15:54 by pl7i92	Replies:4 Views:354	Last Post by pl7i92 16 Dec 2018 15:54
Mesa 5i25 7i76 additional steps after fast movement. Topic started 09 Dec 2018 19:11, by myankov Last Post 14 Dec 2018 18:53 by PCW	Replies:3 Views:385	Last Post by PCW 14 Dec 2018 18:53
Min Ferror & Ferror Topic started 28 Jul 2017 17:28, by massimodamassa Last Post 11 Dec 2018 16:47 by PCW 1 2	Replies:10 Views:1535	Last Post by PCW 11 Dec 2018 16:47
Spindle speed feedback Topic started 12 Nov 2018 01:05, by biqut2 Last Post 29 Nov 2018 23:41 by biqut2 1 2 3 4	Replies:30 Views:1266	Last Post by biqut2 29 Nov 2018 23:41
repeatability and calibration issues Topic started 27 Nov 2018 20:25, by Omnis Last Post 29 Nov 2018 19:55 by Omnis	Replies:8 Views:311	Last Post by Omnis 29 Nov 2018 19:55
SPINDLE LOWPASS GAIN EFFECTING ATC Topic started 29 Nov 2018 18:08, by COlger81 Last Post 29 Nov 2018 19:33 by COlger81	Replies:7 Views:216	Last Post by COlger81 29 Nov 2018 19:33
Help, Completely stuck on Homing Problem Topic started 18 Sep 2018 03:30, by qto8234 Last Post 27 Nov 2018 11:02 by andypugh	Replies:3 Views:389	Last Post by andypugh 27 Nov 2018 11:02
Homing problems on Z-axis Topic started 18 Nov 2018 20:07, by jnp1968 Last Post 20 Nov 2018 18:34 by jnp1968	Replies:7 Views:458	Last Post by jnp1968 20 Nov 2018 18:34
Spindle PID close loop goes to the maximum value Topic started 16 Nov 2018 16:55, by gantarone Last Post 19 Nov 2018 13:06 by gantarone	Replies:7 Views:311	Last Post by gantarone 19 Nov 2018 13:06
Set Feed Override to 0 every cycle start Topic started 06 Nov 2018 11:50, by mydani Last Post 14 Nov 2018 16:03 by mydani	Replies:8 Views:387	Last Post by mydani 14 Nov 2018 16:03
stepconf work fine but not in lcnc Topic started 19 Nov 2017 18:20, by Shpalman72 Last Post 08 Nov 2018 16:03 by Todd Zuercher 1 2	Replies:12 Views:1255	Last Post by Todd Zuercher 08 Nov 2018 16:03
triac changer tool Topic started 23 Oct 2018 12:13, by gmarconi2 Last Post 02 Nov 2018 19:32 by gmarconi2 1 2	Replies:19 Views:816	Last Post by gmarconi2 02 Nov 2018 19:32
Following error 6I25 - 7I77 Topic started 04 Apr 2018 15:37, by jsskangas Last Post 28 Oct 2018 13:58 by jsskangas 1 2	Replies:16 Views:881	Last Post by jsskangas 28 Oct 2018 13:58
plasma arc goes out mid cut.... how to pause program, reprobe, and restart? Topic started 28 Sep 2018 07:27, by jimmyrig Last Post 25 Oct 2018 12:53 by andypugh 1 2 3	Replies:22 Views:1030	Last Post by andypugh 25 Oct 2018 12:53
Problem with Gantry Homing Topic started 23 Oct 2018 19:33, by sevaz Last Post 24 Oct 2018 12:45 by dgarrett	Replies:5 Views:402	Last Post by dgarrett 24 Oct 2018 12:45
Crosstalk between water cooled spindle and endstops immediately when starting Topic started 22 Oct 2018 20:48, by goaran Last Post 23 Oct 2018 15:40 by andypugh	Replies:1 Views:200	Last Post by andypugh 23 Oct 2018 15:40
hall effect home switches Topic started 18 Oct 2018 21:26, by Dr. John Last Post 22 Oct 2018 16:31 by tommylight 1 2	Replies:16 Views:619	Last Post by tommylight 22 Oct 2018 16:31
Servo Tune Newbie Topic started 30 Oct 2013 22:57, by DaOne Last Post 19 Oct 2018 06:38 by jlviloria 1 2	Replies:11 Views:2540	Last Post by jlviloria 19 Oct 2018 06:38

Time to create page: 0.148 seconds