1. Configuring LinuxCNC
  3. Basic Configuration
  5. SL57D Stepper Drivers, unsure how to read driver timings.

SL57D Stepper Drivers, unsure how to read driver timings.

More
09 Mar 2025 01:02 #323550 by ccatlett1984
SL57D Stepper Drivers, unsure how to read driver timings. was created by ccatlett1984
www.aliexpress.us/item/3256805790238823.html

I am waiting for the manual from the seller, will add when i receive it.
File Attachment:

 

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
09 Mar 2025 01:07 #323551 by tommylight
Replied by tommylight on topic SL57D Stepper Drivers, unsure how to read driver timings.
Leave them at default 5000 till you have everything working properly, then you can decide if you need to mess with timings. Usually there is no need.

Please Log in or Create an account to join the conversation.

  1. Configuring LinuxCNC
  3. Basic Configuration
  5. SL57D Stepper Drivers, unsure how to read driver timings.
Time to create page: 0.049 seconds
Powered by Kunena Forum