speed not increasing
- mehdidadash
-
Topic Author
- Offline
- Senior Member
-
Less
More
- Posts: 55
- Thank you received: 4
09 Jun 2025 15:32 #330024
by mehdidadash
speed not increasing was created by mehdidadash
hi dear friends
i have this file.ngc which is used to produce a workpiece in series.
my issue is that speed does not increase . even when i change #4 parameter in file,ngc
i tested g0 and g1 in mdi and machine moves in 4800mm/min speed without any problem but when i run this file.ngc code, speed is limited to 130 roughly
i have this file.ngc which is used to produce a workpiece in series.
my issue is that speed does not increase . even when i change #4 parameter in file,ngc
i tested g0 and g1 in mdi and machine moves in 4800mm/min speed without any problem but when i run this file.ngc code, speed is limited to 130 roughly
Please Log in or Create an account to join the conversation.
- mehdidadash
-
Topic Author
- Offline
- Senior Member
-
Less
More
- Posts: 55
- Thank you received: 4
09 Jun 2025 16:10 #330028
by mehdidadash
Replied by mehdidadash on topic speed not increasing
i changed z steps from 0.05 to 0.1 and it increased speed but it is lower than what i want and what it should be.
Please Log in or Create an account to join the conversation.
Time to create page: 0.049 seconds