LOOKING FOR PROGRAMER

More
14 Oct 2015 01:50 - 15 Oct 2015 02:24 #63758 by magicine
I have some modifications I need to have done on my control software. (pathpilot) As much as I would like to master this control software (LinuxCNC under the hood), I don't have a year to sit down and learn LinuxCNC or reverse engineer my control software, I've browsed around in the files and it looks pretty straight forward for someone intimately familiar with LinuxCNC.

I've managed to make some simple tweaks myself but beyond this I'm getting in too deep. Actually I'm making more progress as I get more knowledgeable about ECM, but I'm sure I'll run into a road block here and there.
This would be a paid gig.

if you are a Linux CNC master and want a challenge an make a little $ on the side, PM me.

john
Last edit: 15 Oct 2015 02:24 by magicine.

Please Log in or Create an account to join the conversation.

More
15 Oct 2015 01:37 #63762 by BigJohnT
Replied by BigJohnT on topic LOOKING FOR PROGRAMER
You might want to mention that is not LinuxCNC but Path Pilot...

JT

Please Log in or Create an account to join the conversation.

More
15 Oct 2015 23:43 #63786 by cncbasher
Replied by cncbasher on topic LOOKING FOR PROGRAMER
what exactly do you need doing ?

Please Log in or Create an account to join the conversation.

More
16 Oct 2015 00:22 #63787 by magicine
Replied by magicine on topic LOOKING FOR PROGRAMER
sent you an email cncbasher

jh

Please Log in or Create an account to join the conversation.

More
16 Oct 2015 19:34 #63819 by andypugh
Replied by andypugh on topic LOOKING FOR PROGRAMER

if you are a Linux CNC master and want a challenge an make a little $ on the side, PM me.


I don't need money, but I do like a challenge. I think that is true for many of us.

Try describing what you want, if it is interesting enough (or more widely useful) then it might get done for free.

Please Log in or Create an account to join the conversation.

More
16 Oct 2015 23:28 #63837 by cncbasher
Replied by cncbasher on topic LOOKING FOR PROGRAMER
mail heading your way Andy

Please Log in or Create an account to join the conversation.

More
17 Oct 2015 03:05 #63852 by magicine
Replied by magicine on topic LOOKING FOR PROGRAMER
sent you an email Andy

check it out, this is my place

eti-fuelcel.com

Please Log in or Create an account to join the conversation.

More
19 Oct 2015 05:21 #63909 by tommylight
Replied by tommylight on topic LOOKING FOR PROGRAMER
Raise your hands if anyone feels left out of a challenge !
Oh well, just kidding i was way to busy lately setting up a KUKA robot, and by setting i mean everything fro electrical installations and modifications, to software modifications to actual programming of outputs and .............everything !!! If anyone is interested have a look at robot-forum.com i am there under the same user name.
Back on topic......oh wait there is nothing on topic..... :) :) :)

Regards,
Tom

Please Log in or Create an account to join the conversation.

Time to create page: 0.090 seconds
Powered by Kunena Forum