Techno CNC router table -SOLD

More
04 May 2016 01:13 - 07 Aug 2016 19:43 #74206 by Duc
Techno CNC router table -SOLD was created by Duc
Techno CNC 3024 Router.
DC servo drives
Drive System: Ball screws on X, Y, and Z axes with anti-backlash ball nuts
1 KW HSD spindle
2.2KW VFD Motortronics CSD
Table Weight 500-800 LBS (Heavy construction)
Caster wheels welded to allow table to move around.

X-Axis Travel = 30.0"
Y-Axis Travel = 24.0"
Z-Axis Travel = 8.9"
Gantry Clearance = 5-7/8
Max. speed: 250 in/min

Control voltage full load amperage = 6.3 amps

Spindle info: 3 HP HSD (220V, 3-Phase). Fully programmable speeds from 12,000 to 18,000 RPM. Full load amperage = 9.7 amps. Noise level = 65 db

Table was running 3 years ago for AL engraving. Been in storage after business shutdown and the computer system running the table was misplaced. A new I/O card can be purchased from Techno CNC for $550 and installed into a standard pc with a PCI slot. The card has been verified to be in stock at Techno CNC.


5,000 OBO
Prefer local pickup but can ship if buyer arranges shipping

File Attachment:


File Attachment:


File Attachment:

.
Last edit: 07 Aug 2016 19:43 by Duc.

Please Log in or Create an account to join the conversation.

More
07 Aug 2016 19:43 #78454 by Duc
Replied by Duc on topic Techno CNC router table
SOLD

Please Log in or Create an account to join the conversation.

Time to create page: 0.077 seconds
Powered by Kunena Forum