FREE !!! Marysville Wa.area.
- davidcnc
- Offline
- New Member
Less
More
- Posts: 8
- Thank you received: 0
15 Jun 2021 20:52 #212144
by davidcnc
FREE !!! Marysville Wa.area. was created by davidcnc
One complete Pico Systems, 4 axis +/- 10vdc parallel interface, One complete Mesa 4 axis +/- 10 vdc parallel interface,
4 400 vdc 50 amp servo amps, 10 +/- input, This all never installed. Please unlock your trunk & come on down. Too much
used to mention. Dave (This email address is being protected from spambots. You need JavaScript enabled to view it.) or 425 239 7936. Ps 85 & down sizing.
4 400 vdc 50 amp servo amps, 10 +/- input, This all never installed. Please unlock your trunk & come on down. Too much
used to mention. Dave (This email address is being protected from spambots. You need JavaScript enabled to view it.) or 425 239 7936. Ps 85 & down sizing.
Please Log in or Create an account to join the conversation.
- tommylight
- Away
- Moderator
Less
More
- Posts: 19419
- Thank you received: 6512
15 Jun 2021 21:22 #212145
by tommylight
Replied by tommylight on topic FREE !!! Marysville Wa.area.
Nice, thank you, but i am to far from everything.
Please Log in or Create an account to join the conversation.
- BigJohnT
- Offline
- Administrator
Less
More
- Posts: 7106
- Thank you received: 1177
15 Jun 2021 22:12 - 15 Jun 2021 22:19 #212148
by BigJohnT
Replied by BigJohnT on topic FREE !!! Marysville Wa.area.
I mentioned this to a guy in OR not sure how close to you he is or not.
JT
JT
Last edit: 15 Jun 2021 22:19 by BigJohnT.
Please Log in or Create an account to join the conversation.
- fc60
- Offline
- Premium Member
Less
More
- Posts: 131
- Thank you received: 7
16 Jun 2021 20:08 #212211
by fc60
Replied by fc60 on topic FREE !!! Marysville Wa.area.
Greetings,
I am interested.
Sent email with no reply, as yet.
If needed, a nice road trip up North may be in order.
Cheers,
David
I am interested.
Sent email with no reply, as yet.
If needed, a nice road trip up North may be in order.
Cheers,
David
Please Log in or Create an account to join the conversation.
Time to create page: 0.074 seconds