Stepper motors in France, online shop

More
06 Nov 2023 08:40 #284688 by Chatto
  Raspberry Pi to drive a stepper motor, you need to connect a motor driver module such as L293D or L298N. both of these modules are suitable for 12V stepper motors. Therefore, the choice of driver module depends on you and here the L298N motor driver module has been chosen.
  L298N is a specialized driver IC, which is an H-bridge IC and differs from L293D by its increased output current and enhanced power. Its output current is 2A, the maximum current is 4A, the maximum working voltage is 50V, it can drive inductive loads, such as high-power DC motors, stepping motors, solenoid valves, etc. Especially, its input can be directly connected with the microcontroller, thus it is easily controlled by the microcontroller. When driving DC motors, it can directly control stepper motors and realize forward and reverse motor rotation, which can be realized by changing the logic level of the input.
  The above is my intercept from the information on the steppermotor website, there are many related tutorials on it.

Please Log in or Create an account to join the conversation.

More
05 Dec 2023 12:33 #287268 by tommylight
This is considered spam, but leaving it as it is related and links directly to the main page on the website.
Plenty of cnc stuff there, so if you are in France it might be useful.

Please Log in or Create an account to join the conversation.

Time to create page: 0.129 seconds
Powered by Kunena Forum