Parallel port does not work
- darlansales
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
20 Jul 2011 18:51 - 20 Jul 2011 18:51 #11694
by darlansales
Parallel port does not work was created by darlansales
Hello Guys, I live in Brazil. I installed Ubuntu 10.04 and EMC2. The board did not come hand with the parallel port, I decided to buy a pci parallel card, however the parallel port of the signal and not engines do not work. You are missing some detail the configuration of the EMC2?
Thanks to all
Darlan Sales
Thanks to all
Darlan Sales
Last edit: 20 Jul 2011 18:51 by darlansales.
Please Log in or Create an account to join the conversation.
20 Jul 2011 22:07 #11697
by Rick G
Replied by Rick G on topic Re:Parallel port does not work
Take a look here...
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting
Also from a terminal type
lspci -v
To find the address of the add in card.
Rick G
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TroubleShooting
Also from a terminal type
lspci -v
To find the address of the add in card.
Rick G
Please Log in or Create an account to join the conversation.
20 Jul 2011 22:10 #11698
by Rick G
Replied by Rick G on topic Re:Parallel port does not work
Please Log in or Create an account to join the conversation.
- darlansales
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
21 Jul 2011 15:09 #11712
by darlansales
Replied by darlansales on topic Re:Parallel port does not work
Hello Guys,
He gave everything right, because my friends here in Brazil helped me so I put the physical address of the parallel plate in the EMC2 Stepconf
EX: First Base Address parport 0xec00 Out
Sorry for my English, but I think something has to understand
Thanks guys
Thank God
Darlan Sales
He gave everything right, because my friends here in Brazil helped me so I put the physical address of the parallel plate in the EMC2 Stepconf
EX: First Base Address parport 0xec00 Out
Sorry for my English, but I think something has to understand
Thanks guys
Thank God
Darlan Sales
Please Log in or Create an account to join the conversation.
21 Jul 2011 16:06 - 21 Jul 2011 16:08 #11713
by andypugh
Replied by andypugh on topic Re:Parallel port does not work
What tests are you doing that make you think that the parallel port is not working?
There are so many parts of the system that can be wrongly configured that it is difficult to guess what is wrong.
You might find this useful:
wiki.linuxcnc.org/emcinfo.pl?Parallel_Port_Tester
(note that you will need to edit the first line of the .hal file to suit your base address, but try 0 and 1 too)
There are so many parts of the system that can be wrongly configured that it is difficult to guess what is wrong.
You might find this useful:
wiki.linuxcnc.org/emcinfo.pl?Parallel_Port_Tester
(note that you will need to edit the first line of the .hal file to suit your base address, but try 0 and 1 too)
Last edit: 21 Jul 2011 16:08 by andypugh.
Please Log in or Create an account to join the conversation.
Time to create page: 0.065 seconds