linuxcnc-dev repository?
02 Feb 2013 21:19 #29487
by alan_3301
linuxcnc-dev repository? was created by alan_3301
I know i've done this in the past, but cant get it on my simulation.
I'm trying to:
sudo apt-get install linuxcnc-dev
also tried emc2-dev
what repository are they stored on? or am I using the wrong command?
I wanted to post a hal component, but wanted to test it out from the start to make sure everything works.
I'm trying to:
sudo apt-get install linuxcnc-dev
also tried emc2-dev
what repository are they stored on? or am I using the wrong command?
I wanted to post a hal component, but wanted to test it out from the start to make sure everything works.
Please Log in or Create an account to join the conversation.
02 Feb 2013 21:24 #29488
by alan_3301
Replied by alan_3301 on topic linuxcnc-dev repository?
sorry for basic question. I search for 20 minutes and cant find the answer. As soon an I post a question, I find the answer.
wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC
section 2.1.1
wiki.linuxcnc.org/cgi-bin/wiki.pl?Installing_LinuxCNC
section 2.1.1
Please Log in or Create an account to join the conversation.
Time to create page: 0.061 seconds