ubuntu 10.04.4 linuxcnc install problem
04 Apr 2013 01:18 - 04 Apr 2013 14:34 #32239
by jinooj
ubuntu 10.04.4 linuxcnc install problem was created by jinooj
I've just installed ubuntu 10.04.4 and tried to install ubuntu-10.04-linuxcnc3.iso.
But it keeps telling me that 'unable to find a medium containing Alive file system'.
Please tell me how to fix it or is it impossible to install ubuntu-10.04-linuxcnc3 on ubuntu 10.04.4?
I checked md5sum before burning DVD.
HDD is SATA2 360GB
But it keeps telling me that 'unable to find a medium containing Alive file system'.
Please tell me how to fix it or is it impossible to install ubuntu-10.04-linuxcnc3 on ubuntu 10.04.4?
I checked md5sum before burning DVD.
HDD is SATA2 360GB
Last edit: 04 Apr 2013 14:34 by jinooj.
Please Log in or Create an account to join the conversation.
- 3kamalakkannan
- Offline
- New Member
Less
More
- Posts: 7
- Thank you received: 3
04 Apr 2013 16:37 #32265
by 3kamalakkannan
Replied by 3kamalakkannan on topic ubuntu 10.04.4 linuxcnc install problem
In BIOS you want change the SATA Configuration
SATA Mode should be in AHCI Mode.
Am also faced problem like you.Now i am installed
SATA Mode should be in AHCI Mode.
Am also faced problem like you.Now i am installed
The following user(s) said Thank You: jinooj
Please Log in or Create an account to join the conversation.
04 Apr 2013 18:26 #32269
by jinooj
Replied by jinooj on topic ubuntu 10.04.4 linuxcnc install problem
Holly smoke, it works!!!
I'm writing this on ubuntu 10.04 with linuxcnc.
Finally, I can get back to my work.
Thank you, 3kamalakkannan. I really mean it.
I'm writing this on ubuntu 10.04 with linuxcnc.
Finally, I can get back to my work.
Thank you, 3kamalakkannan. I really mean it.
Please Log in or Create an account to join the conversation.
Time to create page: 0.070 seconds