Linuxcnc install via usb onto ssd..
- james-mech
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 0
19 Apr 2015 23:47 #57900
by james-mech
Linuxcnc install via usb onto ssd.. was created by james-mech
Hi Guys,
I am trying to install via hybrid iso on usb stick. Live install runs fine. I have intel d525 mainboard and samsung evo 128gb ssd. I have tried and tried but actual install wont go, crashes or hangs at about 11%, checksum is fine. I give up with that. Going to try a full debian wheezy install and setup linuxcnc from there. Anyone had similar problems?
Cheers, james
I am trying to install via hybrid iso on usb stick. Live install runs fine. I have intel d525 mainboard and samsung evo 128gb ssd. I have tried and tried but actual install wont go, crashes or hangs at about 11%, checksum is fine. I give up with that. Going to try a full debian wheezy install and setup linuxcnc from there. Anyone had similar problems?
Cheers, james
Please Log in or Create an account to join the conversation.
- james-mech
- Offline
- Junior Member
-
Less
More
- Posts: 22
- Thank you received: 0
20 Apr 2015 09:32 #57919
by james-mech
Replied by james-mech on topic Linuxcnc install via usb onto ssd..
Fixed - one of my memory sticks was bad, all working now...
Please Log in or Create an account to join the conversation.
Time to create page: 0.053 seconds