LinuxCNC on Raspberry
- MarcoGaspar
- Offline
- Premium Member
-
Less
More
- Posts: 90
- Thank you received: 2
21 May 2017 13:45 #93437
by MarcoGaspar
Can you share your SD Card iso?
Replied by MarcoGaspar on topic LinuxCNC on Raspberry
I tried it with the new Raspbian, it looks better.
Can you share your SD Card iso?
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 20022
- Thank you received: 6803
21 May 2017 21:41 #93452
by tommylight
Replied by tommylight on topic LinuxCNC on Raspberry
FYI, Viktan has sent me the pidi 3805 and 3811, and i received them already, thank you Viktan.
Due to a miss hap i was not able to test them yet, burnt my right hand on a freshly welded piece of round bar, a guy came at me with it so i grabbed it to get it off him......nevermind, i already have 2 raspberry pi3 and a pi2 on the way, so will be doing the testing and reporting soon. Also got a 3.5 tons MAZAK so that did postpone things a bit.
Due to a miss hap i was not able to test them yet, burnt my right hand on a freshly welded piece of round bar, a guy came at me with it so i grabbed it to get it off him......nevermind, i already have 2 raspberry pi3 and a pi2 on the way, so will be doing the testing and reporting soon. Also got a 3.5 tons MAZAK so that did postpone things a bit.
Please Log in or Create an account to join the conversation.
- viktan
- Offline
- Senior Member
-
Less
More
- Posts: 40
- Thank you received: 7
22 May 2017 21:08 #93509
by viktan
Replied by viktan on topic LinuxCNC on Raspberry
I don't have it, it was not stable, after few hours of testing, linuxcnc was freeze, while os rapbian was still working.
i used this guide www.raspberrypi.org/forums/viewtopic.php?p=920778 (page 39)
i used this guide www.raspberrypi.org/forums/viewtopic.php?p=920778 (page 39)
Please Log in or Create an account to join the conversation.
Time to create page: 0.165 seconds