New Mesa 7i76E setup

More
08 May 2019 15:14 #133152 by shogan50
I'm new. First post actually. I've powered and can ping the mesa card on 10.10.10.10. I have linux cnc installed on linux RTOS. So far so good. I'm trying to set up with pncconf and it seems likely to me that I'm missing a driver as no card options pop up on the first page as shown in the documentation and when I run the file I get an error that it can't find hm2_eth. If someone could orient me, I'd appreciate it. Application is 1025mm x 1025mm, x 350mm gantry router with Colombo spindle, Teknic servos and a resync camera.

Please Log in or Create an account to join the conversation.

More
08 May 2019 16:47 #133169 by PCW
Replied by PCW on topic New Mesa 7i76E setup
The 7I76e requires the uspace version of LinuxCNC and Preempt-RT kernel.
The simplest way to get this is to install the LinuxCNC_Stretch test ISO here:

www.linuxcnc.org/testing-stretch-rtpreem...-uspace-i386-r13.iso
The following user(s) said Thank You: shogan50

Please Log in or Create an account to join the conversation.

Time to create page: 0.185 seconds
Powered by Kunena Forum