(superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
- tommylight
-
Topic Author
- Away
- Moderator
-
- Posts: 18563
- Thank you received: 6219
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
- Posts: 18563
- Thank you received: 6219
Do not change the title of the topic when replying to it, please.
Had a shock when i saw a title i could not recognize started by me !!!
![:) :)](/media/kunena/emoticons/smile.png)
Please Log in or Create an account to join the conversation.
It would be nice if that could be prevented...WARNING:
Do not change the title of the topic when replying to it, please.
Had a shock when i saw a title i could not recognize started by me !!!
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Offline
- User is blocked
-
- Posts: 1437
- Thank you received: 570
I can see the subject box, but wow changing a title doesn't seem right.
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
- Posts: 18563
- Thank you received: 6219
Now i have to edit the original post to set it back, again!
I agree that this should be prevented, it causes a mess for searching with the added load on the server when adding another copy of the same topic to the database.
Please Log in or Create an account to join the conversation.
Files now available, as usual tested in Vbox
md5: 86 bytes (86 bytes)
drive.google.com/open?id=1jcSdgUkSubGNo8oRt_acU_0sjqCFJZyN
iso: 2.3 GB (2340421632 bytes):
drive.google.com/open?id=17f4FhtF5hayFpumpNHrGFyJ0OQlRb9aT
Enjoy
Ok I have put the above on a stick using Win32DiskImager everything went to plan and just worked.
Q. What is the difference between the two iso's . ie the one above and the one from the 11th LinuxMint-19.2-LCNC-2.9-rt-4.16.12-kona-amd64
Thanks again for the hard work you are putting into this.
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
- Posts: 18563
- Thank you received: 6219
This one has working QTVCP already installed.Q. What is the difference between the two iso's . ie the one above and the one from the 11th LinuxMint-19.2-LCNC-2.9-rt-4.16.12-kona-amd64
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Offline
- User is blocked
-
- Posts: 1437
- Thank you received: 570
Next one, hopefully, will be a RTAI version. Had some issues with Andy's test linuxcnc packages relating to qtvcp designer. Posted up on the thread to see if there's some I screwed up.
Am currently building Linuxcnc 2.9 rtai packages and will see how it goes.
Once again big thanks to all who have downloaded the images and given them a twirl. Very much appreciated.
Cheers
Rob
Please Log in or Create an account to join the conversation.
- tommylight
-
Topic Author
- Away
- Moderator
-
- Posts: 18563
- Thank you received: 6219
Please Log in or Create an account to join the conversation.
- BeagleBrainz
-
- Offline
- User is blocked
-
- Posts: 1437
- Thank you received: 570
Should have the RTAI done tomorrow morning, finished compiling the 2.9 RTAI Linuxcnc packages, qtvcp designer runs ok.
Kinda glad I've setup a local repo for the packages, saves having to wait to get packages off the net.
Wonder if it's worth doing an XFCE version...............
Please Log in or Create an account to join the conversation.