(superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation

More
6 years 6 months ago #165355 by Nate
Replied by Nate on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
I would have to go back and check I just remember some of the links on the step by step I have been fallowing are listed as ...... amd64

Please Log in or Create an account to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 6 months ago #165357 by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
amd64 will work for intel 64 bit

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #165433 by Nate
Replied by Nate on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
now i am getting stumped when i get to this step gnipsel.com/linuxcnc/uspace/linuxmint19-eth.html

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #165442 by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Try this:
forum.linuxcnc.org/27-driver-boards/3559...ethernet-mesa-boards
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

  • BeagleBrainz
  • New Member
  • New Member
More
6 years 6 months ago #165505 by BeagleBrainz
Replied by BeagleBrainz on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Ok just tested this with Mint 19.2 installed in a Virtual Machine to install a RT_PRREMPT kernel & Linuxcnc.


Import the key:
Code:
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-key 60DE9F5F42214E43

Add the source:
Code:
sudo add-apt-repository 'deb http://cnc.beaglebrainz.net/mintcnc/ bionic 2.8-rtpreempt'

Finally install:
Code:
sudo apt-get update sudo apt-get install linux-image-4.19.106-rt44-lcnc linux-headers-4.19.106-rt44-lcnc sudo apt-get install linuxcnc-uspace linuxcnc-uspace-dev linuxcnc-doc-en

Optionally:
linuxcnc-doc-en can be replaced by linuxcnc-doc-es linuxcnc-doc-fr

Reboot and you are done.

Please Log in or Create an account to join the conversation.

More
6 years 6 months ago #165509 by tommylight
Replied by tommylight on topic (superseeded) Linuxcnc on Linux Mint 19.3 quick and easy installation
Nice, thank you.
BTW, i did try the LXQT version of Debian and it looks quite nice.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

Time to create page: 0.259 seconds
Powered by Kunena Forum