Keeping Linuxcnc 2.9 current on Debian Bookworm
12 Jun 2023 01:55 - 19 Jun 2023 02:31 #273362
by rodw
Keeping Linuxcnc 2.9 current on Debian Bookworm was created by rodw
This is now superceded as its in the 2.9 documents now.
Please refer to this link instead. linuxcnc.org/docs/2.9/html/getting-start...etting-linuxcnc.html
Debian Bookworm is now the official stable release of Debian. Yay!!!
But the version of linuxcnc in Bookworm is not current due to the freeze policy leading up to the release.
Lets fix that so you can upgrade to the latest 2.9 at any time.
These steps assume you already have installed linuxcnc from the Debian Bookworm
1. Download the attached file.
2. Rename it to delete the .txt extension which is just there to fool the forum
3. Open a terminal window
4. Follow the steps in the comments at the top of the file repeated here for convenience:
[/code]
Please refer to this link instead. linuxcnc.org/docs/2.9/html/getting-start...etting-linuxcnc.html
Debian Bookworm is now the official stable release of Debian. Yay!!!
But the version of linuxcnc in Bookworm is not current due to the freeze policy leading up to the release.
Lets fix that so you can upgrade to the latest 2.9 at any time.
These steps assume you already have installed linuxcnc from the Debian Bookworm
1. Download the attached file.
2. Rename it to delete the .txt extension which is just there to fool the forum
3. Open a terminal window
4. Follow the steps in the comments at the top of the file repeated here for convenience:
cd ~/Downloads
wget http://buildbot2.highlab.com/buildbot-archive-key.gpg
sudo cp ./buildbot-archive-key.gpg /etc/apt/trusted.gpg.d
sudo cp ./99linuxcnc-uspace /etc/apt/preferences.d/
sudo echo "deb http://buildbot2.highlab.com/debian/ bookworm 2.9-uspace" | sudo tee -a /etc/apt/sources.list
sudo apt update
sudo apt upgrade
Anytime you want to update to the latest version of Linuxcnc 2.9 all you have to do is type
[code]sudo apt update
sudo apt upgrade
Note:
1. Bullsye users can also enjoy this method by substituting the 5th line with the Bullseye line above
2. You can update to Master branch Version 2.10 by changing 2.9-uspace to master-uspace in the 5th line above
3. If you have already used this method to install V 2.9, edit the /etc/apt/sources.list manually as it won't be cool to have duplicate lines in this critical linux config file.
3. Please take care to follow these steps precisely so you don't erase your sources.list file like I did!Please Log in or Create an account to join the conversation.
17 Jun 2023 22:00 #273753
by tommylight
Replied by tommylight on topic Keeping Linuxcnc 2.9 current on Debian Bookworm
@Rod,
There is the line with 99linuxcnc-uspace that fails since there is no info on creating that file.
The installation works without it, and updates work properly.
For anyone interested in creating that file, go to Rod's howto
vmnet.com.au/linuxcnc/getting-linuxcnc.h...an_bookworm_x86_only
-
On a side note:
I HATE DEBIAN!
Why the hell does it have (and insists on using) Raspberry Pi stuff???
To be clear, i used the Hybrid version with Mate desktop environment, so others versions might not have this issue.
The issue:
-Installs OK
-Updates and upgrades OK
-While installing LinuxCNC, it also installs the RT kernel.
-LinuxCNC installs and works OK
-It hangs on kernel install complaining about "raspi" stuff missing
Solution:
-Open terminal
-type sudo caja
-open /etc/ folder
-Press ctrl+f and type z50*
-it will find 3 files, delete all 3
-do a sudo apt upgrade again
Everything works, so far.
There is the line with 99linuxcnc-uspace that fails since there is no info on creating that file.
The installation works without it, and updates work properly.
For anyone interested in creating that file, go to Rod's howto
vmnet.com.au/linuxcnc/getting-linuxcnc.h...an_bookworm_x86_only
-
On a side note:
I HATE DEBIAN!
Why the hell does it have (and insists on using) Raspberry Pi stuff???
To be clear, i used the Hybrid version with Mate desktop environment, so others versions might not have this issue.
The issue:
-Installs OK
-Updates and upgrades OK
-While installing LinuxCNC, it also installs the RT kernel.
-LinuxCNC installs and works OK
-It hangs on kernel install complaining about "raspi" stuff missing
Solution:
-Open terminal
-type sudo caja
-open /etc/ folder
-Press ctrl+f and type z50*
-it will find 3 files, delete all 3
-do a sudo apt upgrade again
Everything works, so far.
Please Log in or Create an account to join the conversation.
Time to create page: 0.092 seconds