updates 2.9 Bookworm

get an error trying this when i enter the tx line and don't get much info from sudo ethtool c enp0s25

thoughts?

 

You cannot set TX usecs on some hardware

If you watch hm2_[card].0.read.time as you adjust the rx-usecs value
You will find the time time gets longer for any rx-usecs value other than 0.

This is not surprising since the rx-usecs value is how long the host should
hang in the Ethernet interrupt service routine before exiting. Waiting make sense
if you are expecting another packet but this is not the case here.