A Treatsie on the Parallel Port - HP Elitedesk 800 with generic cable
07 Jul 2024 20:34 #304606
by Bari
Replied by Bari on topic A Treatsie on the Parallel Port
Just FYI, for LCNC with LPT cards the lowest latency jitter is typically reached using RTAI.
The latest RTAI debs for 2.9 may be found here:
forum.linuxcnc.org/9-installing-linuxcnc...ng-rtai-debs-for-2-9
The latest RTAI debs for 2.9 may be found here:
forum.linuxcnc.org/9-installing-linuxcnc...ng-rtai-debs-for-2-9
The following user(s) said Thank You: cornholio
Please Log in or Create an account to join the conversation.
- garthnoakes
- Offline
- Senior Member
-
Less
More
- Posts: 51
- Thank you received: 9
12 Nov 2024 16:42 #314332
by garthnoakes
Please Log in or Create an account to join the conversation.
13 Nov 2024 01:11 #314356
by cornholio
Replied by cornholio on topic A Treatsie on the Parallel Port - HP Elitedesk 800 with generic cable
Lenovo are the same, still an easier option than messing around with a PCI or PCIe card.
Please Log in or Create an account to join the conversation.
Time to create page: 0.070 seconds