Compleatly off line Voron image possible ?

  • my1987toyota
  • my1987toyota's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
18 Aug 2025 09:54 - 18 Aug 2025 10:56 #333618 by my1987toyota
Compleatly off line Voron image possible ? was created by my1987toyota
  For the last few weeks there has been a lot of talk and coordinated maneuvering by world governments
and private companies to compartmentalize sensor/block  web sites. I do worry how long before sites like
Linux, Voron, LinuxCNC, Github, and the like get blocked. ( Won't somebody Please think of the children )
The reason this is relevant is because of how many software providers distribute there software via 
downloads from the Web instead of  from physical media. Even Raspberry Pi pretty much encourages
everyone to use the online Pi imager tool.

  So my question is, Has anyone made a full image for Voron  2.4 with- Klipper, Mainsail, Moonraker,
KlipperScreen and so on?

I know at least Linux sells physical media for most of the main distros so at least there's that.

A lot of what's been going on wreaks of Prohibition 2.0. It also shows that since big companies can't
seem to offer anything of value anymore so they are pivoting to pay extorsion schemes. Sure you can
buy the physical device but you must pay a monthly fee for it to operate. Or pay even more and they
will add something extra. Oh and it also has to be connected to the internet at all times  to make sure
it is being used properly. You know for Safety and Security reasons.

  I know this has been a bit of a rant. That said stock up / Back up as much software as you can. It's
going to get worse out there.
 
Last edit: 18 Aug 2025 10:56 by my1987toyota.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
18 Aug 2025 14:10 #333627 by tommylight
Replied by tommylight on topic Compleatly off line Voron image possible ?
GitHub is gone, totally now since it's CEO resigned a few days back, so now it is fully controlled by MicroShaft!
First thing to download and save is CloneZilla, and use it to make images of Klipper/Mainsail/etc and LinuxCNC AFTER setting up properly everything.
As for Orca Slicer, Super Slicer, etc, and FreeCAD, KdenLive, etc, those always have AppImages for download, so hoard those.
The following user(s) said Thank You: my1987toyota

Please Log in or Create an account to join the conversation.

  • my1987toyota
  • my1987toyota's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
18 Aug 2025 15:57 - 18 Aug 2025 16:20 #333631 by my1987toyota
Replied by my1987toyota on topic Compleatly off line Voron image possible ?
Every day it just gets worse   I guess the new slogan will be " If you can't beat them, ban them."
Last edit: 18 Aug 2025 16:20 by my1987toyota.

Please Log in or Create an account to join the conversation.

  • rodw
  • rodw's Avatar
  • Away
  • Platinum Member
  • Platinum Member
More
19 Aug 2025 07:12 #333655 by rodw
After 15 years of google drive, and running a Synology NAS, I have moved to on site (at home) for all my emails and web sites. But I started using cloudflare for dns. Should I do that?

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
19 Aug 2025 14:55 #333683 by tommylight
Replied by tommylight on topic Compleatly off line Voron image possible ?
I have no bad info on CloadFlare so far, hope they continue.
Just keep in mind that all your traffic goes through them, so they know what your watching... :)

Please Log in or Create an account to join the conversation.

  • rodw
  • rodw's Avatar
  • Away
  • Platinum Member
  • Platinum Member
More
21 Aug 2025 03:01 #333745 by rodw

I have no bad info on CloadFlare so far, hope they continue.
Just keep in mind that all your traffic goes through them, so they know what your watching... :)

No that's disabled. They just do the DNS

Please Log in or Create an account to join the conversation.

Time to create page: 0.067 seconds
Powered by Kunena Forum