LinuxCNC will not start

I've installed MachineKit on a BBB plus BeBoPr++ to control a Mini Kossel delta 3D printer via the package installer. When I start LinuxCNC it shows the profiles to pick from. I picked the one from

ARM -> BeagleBone -> BeBoPr++ -> Pololu -> lineardelta

I told it to make a copy and then it starts up LinuxCNC. I see the splash screen then nothing else. The linuxcnc.log file contains the below repeated four times.

ep 26 02:25:10 beaglebone msgd:0: startup pid=28168 flavor=posix rtlevel=1 usrlevel=1 halsize=512000 shm=Posix gcc=4.6.3 version=git not installed at configure time
Sep 26 02:25:10 beaglebone msgd:0: ▒~V~R~XMQ=4.0.4 czmq=2.2.0 protobuf=2.4.1
Sep 26 02:25:10 beaglebone msgd:0: configured: Sep 21 2014 05:43:06 sha=git not installed or executable
Sep 26 02:25:10 beaglebone msgd:0: built: Sep 21 2014 05:46:32 sha=git not installed or executable
Sep 26 02:25:10 beaglebone msgd:0: publishing ZMQ/protobuf log messages at ipc:///tmp/0.log.a42c8c6b-4025-4f83-ba28-dad21114744a
Sep 26 02:26:38 beaglebone msgd:0: msgd:0: Terminated - shutting down
Sep 26 02:26:38 beaglebone msgd:0: normal shutdown - global segment detached
Sep 26 02:32:37 beaglebone msgd:0: startup pid=1450 flavor=posix rtlevel=1 usrlevel=1 halsize=512000 shm=Posix gcc=4.6.3 version=git not installed at configure time

This seems to indicate that git isn't installed but I know that's not the case. I'm a beginner with Linux & LinuxCNC. Hopefully, this is an obvious problem for someone that knows the OS better.

Thanks!

Ian

Hi

I see you have posted on the MachineKit forum also, that is the correct place for the query.

You are not running Linuxcnc, even though that is displayed in Axis when you start and you are probably running a Xenomai kernel, which Linuxcnc does not support.

regards