G53 G0 Z0.

More
05 Aug 2024 23:25 #307045 by Mecanix
Replied by Mecanix on topic G53 G0 Z0.
G53 G0 Z0 is irrelevant with any postprocessor. Re-read member bevins' explanation above for a better understanding of the difference between MCS and WCS.

In short G53 is your home position, ideally. Or a machine set safe-plane, depending on the machine builder's cfg.

Please Log in or Create an account to join the conversation.

Moderators: Skullworks
Time to create page: 0.056 seconds
Powered by Kunena Forum