Time and date on Gmoccapy

It looks like 1.5.5, I can't open my config, but a current ( as of last friday ) sim config shows 1.5.5, I looked at ,

newbynobi wrote: Or you do the changes directly on the file

Code:

/usŕ/bin/gmoccapy

do not change owner or mode. That is the way you will not need the source or to remake linuxcnc.

For gmoccapy 1.5.3.1 the corresponding line to make the changes is 1364

Norbert

And didn't find the " self.widgets.lbl_time.set_label( strftime( "%H:%M:%S" ) + "\n" + strftime( "%d.%m.%Y" ) )" line any where, I searched the whole file, and couldn't find it all.

Thanks

Rick

Hallo Rick, sorry for the late answer.

It must be there

in gmoccapy 1.5.5.2 it is in line 1370,

just searche for

def _periodic

and some lines down you will find the line

Norbert

Yeah, I'm not sure what I had going on, but after I did a fresh pull, and re-compiled, it was there and I changed it.

I had a few things fouled up on the machine, but we're back to making chips now

Thanks

Rick