probe_parport with Gmoccapy
- thor44
- Topic Author
- Offline
- Premium Member
Less
More
- Posts: 82
- Thank you received: 2
23 Jul 2016 22:24 #77892
by thor44
probe_parport with Gmoccapy was created by thor44
just installed Linuxcnc 2.7.5 and I am trying to use the config files from my Ubuntu Linuxcnc 2.6 setup and it is giving me an error message "cant find probe_ parport module. " Im guessing that somrthing has changed between 2.6 and 2.7 or its a Debian thing, any way I help in trying to get the config file to work with Gmoccapy.
Any help would be great. I'm hope the attached file works I'm still figuring out Debian
Thanks
Orson
Any help would be great. I'm hope the attached file works I'm still figuring out Debian
Thanks
Orson
Please Log in or Create an account to join the conversation.
- PCW
- Away
- Moderator
Less
More
- Posts: 17869
- Thank you received: 4776
23 Jul 2016 22:51 #77893
by PCW
Replied by PCW on topic probe_parport with Gmoccapy
Please Log in or Create an account to join the conversation.
- newbynobi
- Offline
- Moderator
Less
More
- Posts: 2075
- Thank you received: 406
24 Jul 2016 19:30 #77929
by newbynobi
Replied by newbynobi on topic probe_parport with Gmoccapy
@Orson,
please clean up your config folder. Delete all unneeded files, otherwise no one will be able to help in case you have more questions.
Norbert
please clean up your config folder. Delete all unneeded files, otherwise no one will be able to help in case you have more questions.
Norbert
Please Log in or Create an account to join the conversation.
Moderators: newbynobi, HansU
Time to create page: 0.137 seconds