Change Mode with HAL pins

Start
Prev
1
Next
End

nonkeldw
Offline
Junior Member

08 Sep 2019 15:04 #144522 by nonkeldw

Change Mode with HAL pins was created by nonkeldw

Hello
I want to change the mode (Manual, MDI, auto,..) of gmoccapy, is it possible to do this with HAL pins? I can't find the right HAL pins to do this

Thanks

Please Log in or Create an account to join the conversation.

pl7i92
Offline
Platinum Member

08 Sep 2019 15:14 #144525 by pl7i92

Replied by pl7i92 on topic Change Mode with HAL pins

changing the mode from WHERE
MPG
sidepanel VCP ?

Please Log in or Create an account to join the conversation.

nonkeldw
Offline
Junior Member

08 Sep 2019 15:18 #144527 by nonkeldw

Replied by nonkeldw on topic Change Mode with HAL pins

From hardware button (input from MESA Card)

Please Log in or Create an account to join the conversation.

pl7i92
Offline
Platinum Member

08 Sep 2019 15:23 #144529 by pl7i92

Replied by pl7i92 on topic Change Mode with HAL pins

the simplest way is to use the postgui HALUI

halui.mode.auto
halui.mode.manual
halui.mode.mdi

Please Log in or Create an account to join the conversation.

nonkeldw
Offline
Junior Member

08 Sep 2019 15:30 #144532 by nonkeldw

Replied by nonkeldw on topic Change Mode with HAL pins

Thanks! I found the HAL pin in the manual.

Please Log in or Create an account to join the conversation.

pl7i92
Offline
Platinum Member

08 Sep 2019 15:31 #144533 by pl7i92

Replied by pl7i92 on topic Change Mode with HAL pins

NP you are welcome
happy to get you thrue

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: newbynobi, HansU

Time to create page: 0.057 seconds