Forum Menu

Tested and adopted, but G54 trouble

More
7 years 2 weeks ago #147944 by newbynobi
Replied by newbynobi on topic Tested and adopted, but G54 trouble
Please post your complete config folder, as i am not able to reproduce.

Norbert

Please Log in or Create an account to join the conversation.

More
7 years 2 weeks ago #148070 by macsddau@linuxcnc
Replied by macsddau@linuxcnc on topic Tested and adopted, but G54 trouble
Hi,
I have trouble with my user account macsddau. I check with administrators and answer as soon as possible.

Please Log in or Create an account to join the conversation.

More
7 years 2 weeks ago #148162 by macsddau@linuxcnc
Replied by macsddau@linuxcnc on topic Tested and adopted, but G54 trouble

newbynobi wrote: Please post your complete config folder, as i am not able to reproduce.

Norbert


Hi Norbert

Here the config folder :

File Attachment:

File Name: CNC2_2019-...stepconf
File Size:10.61 KB

File Attachment:

File Name: CNC2.tar
File Size:40 KB

Please Log in or Create an account to join the conversation.

More
7 years 2 weeks ago - 7 years 2 weeks ago #148172 by macsddau@linuxcnc
Replied by macsddau@linuxcnc on topic SOLVED. Tested and adopted, but G54 trouble
Hi
The problem was that in the CNC2.ini file I didn't enter the good value for PARAMETER_FILE in [RS274NGC] section

replaced "macros" by "CNC2.var" (was linuwcnc.var in zip file).

Program is now displayed at G54 location.
As well, I can now use G30 for tool change location
Last edit: 7 years 2 weeks ago by macsddau@linuxcnc.

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.331 seconds
Powered by Kunena Forum