gmoccapy freeze at toolchange

I reinstalled everything and it was not nativecam as I thought .. the error occurs after installing Campy

Hello
I have other info, practically enough that it goes in the setting ----> advanced setting

---

> launch text message to get the usual block. it confirms to me that it is the message that blocks everything. not the tool change that works perfectly. this after installing

and this problem is the same
campy. www.forum.linuxcnc.org/gmoccapy/34855-ca...occapy-2-7-14#113883

Hello all,
I've the same problem with the automatic tools change, my cnc go to the good position to change the tool and the program freeze there is no popup that appear.
i've the same configuration in the differents files than you .

what's append ?

I don't know what to say ... I reinstalled everything several times and it worked out in the end, but I don't know what the problem was.
regards
Mauro

Ok , yesterday I reinstalled a new conf , with just gmoccapy and toolchange , all is ok.So today , i want to add touch screeen V2 and chek the goog operaration or not.

regards
Philippe