GUI for camshaft grinder

Hi ppl in forum,im newbie here,i was succes instal linux in my router,
And now ihave challenge,my dad have grinding camshaft,he need me to rettofit using linux,
He want like it

Thnk you

Another video







I dont find comercial until hobby making this controller,so i think will hot if linuxcnc can be porting like that

Tnk you

I don't see why you couldn't as long as you can generate the correct gcode. Encoders are probably a good to guarantee timing consistency

Yes,ithink is same idea what iam thinking,
So best process is,touch probe with x axis(wheel) with A axis going turn a.k.a 5 degree,then save coordinat with dxf format,
Then user can be redraw,
Then gcode produce

kayaba wrote:

Yes,ithink is same idea what iam thinking,
So best process is,touch probe with x axis(wheel) with A axis going turn a.k.a 5 degree,then save coordinat with dxf format,
Then user can be redraw,
Then gcode produce

You could most likely use a probe to digitize a cam profile

Yes,any thread to read ?for point cloud in linux?

Take a look in the sim nc_files at gridprobe.ngc
That file does generate a probe file, what can be used in other programs.

At younger tuning times, I used a digital dial (0,001 mm resolution) and steel disk with a 360 degree marks on it.
I transferred every degree a value of the dial to an excel sheet. I used that data do make a master hub and a copy grinding machine to produce the cam shafts for ma motorcycles

Norbert

Yes,it can be realized,but need more long time to generate code.
How about all going to automate process,if its can This way will much better

Hi dear friand,i just open pdf doc was i download,
Mybe its can be porting into linuxcnc

www.qproducts.sk/files/04_Motion_Control.pdf