Forum Menu

Edit Jog Buttons

More
6 years 2 months ago #177566 by eighthaxis
Edit Jog Buttons was created by eighthaxis
Does anyone know how to add the A- and A+ jog buttons to Gmoccapy?

Please Log in or Create an account to join the conversation.

More
6 years 2 months ago #177582 by Mike_Eitel
Replied by Mike_Eitel on topic Edit Jog Buttons
As fare as i know it's decided in the code depending from ini/hal
Have you set all.

Please Log in or Create an account to join the conversation.

More
6 years 2 months ago #177583 by Aciera
Replied by Aciera on topic Edit Jog Buttons
In the INI:

[TRAJ]
COORDINATES = XYZA

Please Log in or Create an account to join the conversation.

More
6 years 2 months ago #177693 by eighthaxis
Replied by eighthaxis on topic Edit Jog Buttons
Thanks for the input guys but Ithink I have Trajectory section correct.
Here are the files:

File Attachment:

File Name: Bostomatic...8-08.ini
File Size:4.4 KB

File Attachment:

File Name: Bostomatic...8-08.hal
File Size:15.13 KB

Please Log in or Create an account to join the conversation.

More
6 years 2 months ago #177694 by Mike_Eitel
Replied by Mike_Eitel on topic Edit Jog Buttons
Have you studied the .ini files described here. The use different planes.

linuxcnc.org/docs/devel/html/gui/gmoccap...moccapy:traj-section

Please Log in or Create an account to join the conversation.

More
6 years 2 months ago #177710 by eighthaxis
Replied by eighthaxis on topic Edit Jog Buttons
I have studied that section of the manual but I can't seem to locate the exaple ini files referenced.
Do you know where the files are located?
I tried a simple search function in the Stretch File manager to no avail.

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.162 seconds
Powered by Kunena Forum