Startup hangs with RS274NGC_STARTUP_CODE = M52P1

...here the remap.py

Regards,

Marc

Hello Norbert,

I found the mistake. in the remap command I had and in remap.py the function was called M910 with a capital M. Sorry, my bad.
But there was no error message or anything indicating to that issue neither with Axis nor with Gmoccapy. Difference just was that Axis was exiting quickly and gemoccapy was hanging.

Sorry again...

Regards,

Marc

Neverthereless we need to check on this, as such errors should never terminate a machine interface

Neverthereless we need to check on this, as such errors should never terminate a machine interface

And please do not use old string format like

MESSAGE("word '%s' = %f" % (key, words[key]))

Should be
MESSAGE("word {0} = {1}". format(key, words[key]))

Norbert