2.9.0-pre0-4388-gc2838822c / Gmoccapy >> Py 3 // gladevcp/iconview.py
17 Sep 2021 13:49 - 17 Sep 2021 14:22 #220892
by rider-83
Replied by rider-83 on topic 2.9.0-pre0-4388-gc2838822c / Gmoccapy >> Py 3 // gladevcp/iconview.py
That worked. Thanks.
But now I have two issues.
When gmoccapy loads in, it won't fit the screen. All the icons are outside the screen boundaries, and I can't find a way to resolve this.
Also, on my previous version of gmo I had done quite a bit of work changing a few features and adding buttons etc. All that has now gone.
Ideally I would prefare my previous version back,as that was working just fine.
If I copy the script from my previous version backup file(3.1.3.1) into the current gmoccappy file, then I get an error at line 30 - import halĀ
No module named hal
?
But now I have two issues.
When gmoccapy loads in, it won't fit the screen. All the icons are outside the screen boundaries, and I can't find a way to resolve this.
Also, on my previous version of gmo I had done quite a bit of work changing a few features and adding buttons etc. All that has now gone.
Ideally I would prefare my previous version back,as that was working just fine.
If I copy the script from my previous version backup file(3.1.3.1) into the current gmoccappy file, then I get an error at line 30 - import halĀ
No module named hal
?
Last edit: 17 Sep 2021 14:22 by rider-83.
Please Log in or Create an account to join the conversation.
- robertspark
- Offline
- Platinum Member
Less
More
- Posts: 915
- Thank you received: 216
17 Sep 2021 16:00 #220916
by robertspark
Replied by robertspark on topic 2.9.0-pre0-4388-gc2838822c / Gmoccapy >> Py 3 // gladevcp/iconview.py
maybe post your script for a check as it's probably a python 3 thing going from old to new (I am no expert and probably won't be able to help but maybe someone will be able to help)
Please Log in or Create an account to join the conversation.
18 Sep 2021 08:46 #220980
by rider-83
Replied by rider-83 on topic 2.9.0-pre0-4388-gc2838822c / Gmoccapy >> Py 3 // gladevcp/iconview.py
I'm going to start a different thread for this issue, instead of tagging it at the end of this one.
Please Log in or Create an account to join the conversation.
Time to create page: 0.082 seconds