Editing Gcode File / Save issues
- Jeff_in_Wa
- Offline
- Senior Member
-
Less
More
- Posts: 68
- Thank you received: 5
16 Aug 2022 18:30 #249903
by Jeff_in_Wa
Editing Gcode File / Save issues was created by Jeff_in_Wa
About a month ago, I noticed when I edit a gcode file within gmoccapy, when I click on "save to existing file", then exit the editor screen, there is now a popup asking if I want to leave without saving the change. Yet the file is updated and saved.
Please Log in or Create an account to join the conversation.
16 Aug 2022 19:01 #249906
by zz912
Replied by zz912 on topic Editing Gcode File / Save issues
This will be fixed in LCNC 2.8.3.
Or you can make RIP build and use 2.8 branche.
linuxcnc.org/docs/stable/html/code/building-linuxcnc.html
Or you can make RIP build and use 2.8 branche.
linuxcnc.org/docs/stable/html/code/building-linuxcnc.html
Please Log in or Create an account to join the conversation.
16 Aug 2022 20:29 #249914
by HansU
Replied by HansU on topic Editing Gcode File / Save issues
According to the website it should be already released: linuxcnc.org/2022/08/09/LinuxCNC-2.8.3/
Please Log in or Create an account to join the conversation.
Time to create page: 0.084 seconds