Question: Gmoccapy 3.4.2 and touchscreen

pistrix
Offline
New Member

26 Nov 2023 18:32 - 26 Nov 2023 18:32 #286565 by pistrix

Replied by pistrix on topic Question: Gmoccapy 3.4.2 and touchscreen

I have just updated to LinuxCNC 2.9 and I have exactly the same problem.

I wonder if anything has been solved about this?

Jan

Last edit: 26 Nov 2023 18:32 by pistrix.

Please Log in or Create an account to join the conversation.

kofsky0328
Offline
Junior Member

06 May 2024 04:45 #299886 by kofsky0328

Replied by kofsky0328 on topic Question: Gmoccapy 3.4.2 and touchscreen

I also encountered the same problem, unable to use the touch screen to drag the preview interface, linuxcnc2.9.2, gmoccapy3.4.6

Please Log in or Create an account to join the conversation.

Obuhus
Offline
New Member

31 Jul 2024 20:42 - 31 Jul 2024 20:47 #306567 by Obuhus

Replied by Obuhus on topic Question: Gmoccapy 3.4.2 and touchscreen

Hey, everybody. I have the same problem. LinuxCNC 2.9.3 released did not solve the problem. Any news on this issue?

Last edit: 31 Jul 2024 20:47 by Obuhus.

Please Log in or Create an account to join the conversation.

Obuhus
Offline
New Member

31 Jul 2024 20:54 #306568 by Obuhus

Replied by Obuhus on topic Question: Gmoccapy 3.4.2 and touchscreen

Hi. I have the same problem. LinuxCNC 2.9.3 released did not solve the problem. Any news on this issue? Thank you/

Please Log in or Create an account to join the conversation.

SilverRain
Offline
New Member

12 Aug 2024 19:58 #307586 by SilverRain

Replied by SilverRain on topic Question: Gmoccapy 3.4.2 and touchscreen

I haven't been able to get 2.9.3 to work for over a month now. more and more new problems... on another machine 2.8.4 there are already 4 goals - everything is fine. I have no more strength. Tomorrow I will roll back to 2.8.4

Please Log in or Create an account to join the conversation.

Obuhus
Offline
New Member

13 Aug 2024 18:06 #307646 by Obuhus

Replied by Obuhus on topic Question: Gmoccapy 3.4.2 and touchscreen

I agree. My project is in the stand stage on the table. But it works within its limits. However, It's not ok to not have a normal touch when it should be the default.

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU

Time to create page: 0.093 seconds