Preview Screen update after Touch off?

So where would the file be with this code? The Display section of my config .ini file does not have anything to hide!

Is there another gmoccapy specific file buried in the source code somewhere?

You must add it to *.ini file.

Okay, but how do you know what the frame name is to use for the hide command?
It's pretty obvious if you created your own custom frame. Or is it really something simple like spindle, coolant, etc.? I don't have my machine in front of me to see if the frames in Gmoccapy have names on them in the bar.

You must use manual:
linuxcnc.org/docs/stable/html/gui/gmocca...py_emb_tab_locations

I understand Section 4.4 Embedded Tabs and Panels. I am trying to prevent Tabs and Panels from displaying, not modifying them, or adding panels.

HansU said "Yes, with "EMBED_TAB_COMMAND = hide" you can simply hide the mentioned frames."

This is in reference to the provided example where you are adding a new Panel:

EMBED_TAB_NAME = DRO
EMBED_TAB_LOCATION = ntb_user_tabs
EMBED_TAB_COMMAND = gladevcp -x {XID} dro.glade

I understand that if you add this to your .ini file you can add the panel.
My question is that if you add something like the following to the .ini, file, is that the method HansU was promoting? Saying you want to remove the Spindle Panel.

EMBED_TAB_NAME = Spindle
EMBED_TAB_LOCATION = ntb_user_tabs
EMBED_TAB_COMMAND = hide

U2fletch wrote:

I understand that if you add this to your .ini file you can add the panel.
My question is that if you add something like the following to the .ini, file, is that the method HansU was promoting? Saying you want to remove the Spindle Panel.

EMBED_TAB_NAME = Spindle
EMBED_TAB_LOCATION = ntb_user_tabs
EMBED_TAB_COMMAND = hide

Exactly!