Run external script on NGC file load?
- kb0thn
- Offline
- New Member
-
Less
More
- Posts: 9
- Thank you received: 0
29 Jan 2025 21:37 #320117
by kb0thn
Run external script on NGC file load? was created by kb0thn
Hi Guys,
I would like to run an external program automatically upon loading a file. Are there any hooks for doing with this LinuxCNC / Gmoccapy?
My goal is to compare the tools in the CAM generated file to my current tool table and make sure there are no mis-matches.
Thanks
-Jim
I would like to run an external program automatically upon loading a file. Are there any hooks for doing with this LinuxCNC / Gmoccapy?
My goal is to compare the tools in the CAM generated file to my current tool table and make sure there are no mis-matches.
Thanks
-Jim
Please Log in or Create an account to join the conversation.
- phillc54
-
- Offline
- Platinum Member
-
Less
More
- Posts: 5719
- Thank you received: 2093
30 Jan 2025 04:53 #320133
by phillc54
Replied by phillc54 on topic Run external script on NGC file load?
You could probably do something with the
FILTER
section of the ini file.
Please Log in or Create an account to join the conversation.
- kb0thn
- Offline
- New Member
-
Less
More
- Posts: 9
- Thank you received: 0
30 Jan 2025 15:08 #320153
by kb0thn
Replied by kb0thn on topic Run external script on NGC file load?
That looks perfect. Thanks for telling me about it!
Please Log in or Create an account to join the conversation.
Moderators: newbynobi, HansU
Time to create page: 0.055 seconds