User Defined M-Codes M100-M199

02 Apr 2025 06:29 #325494 by michaeln

User Defined M-Codes M100-M199 was created by michaeln

Hello,
is it possible that Gmoccapy shows the User Defined M-Codes M100-M199, too?

Thanks!

Please Log in or Create an account to join the conversation.

02 Apr 2025 13:30 #325516 by andypugh

Replied by andypugh on topic User Defined M-Codes M100-M199

Not really, as the system has no way to know if the user-defined codes are modal or not.

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU

Time to create page: 0.116 seconds