ISO for a sysvinit distribution

BeagleBrainz
New Member

6 years 8 months ago #158246 by BeagleBrainz

Replied by BeagleBrainz on topic ISO for a sysvinit distribution

Ran through a HTML doc build there is about 30MB of stuff.
One thing that needs attention is that when clicking the links on the gcode.html (local) they link to linuxcnc.org/docs/devel/html/gcode/g-code.html .......unless the gcode.html page is edited.

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

6 years 8 months ago #158247 by phillc54

Replied by phillc54 on topic ISO for a sysvinit distribution

Ran through a HTML doc build there is about 30MB of stuff.

Thanks for that, I could probably squeeze them in in a pinch..

Edit: It is 300Mb, not 300Kb of remaining space.

One thing that needs attention is that when clicking the links on the gcode.html (local) they link to linuxcnc.org/docs/devel/html/gcode/g-code.html .......unless the gcode.html page is edited.

Kinda makes you wonder whether it's worth doing. I am sure if there are broken links someone will complain.

Please Log in to join the conversation.

BeagleBrainz
New Member

6 years 8 months ago #158252 by BeagleBrainz

Replied by BeagleBrainz on topic ISO for a sysvinit distribution

I'm not good at JS but the issue appears here (in FF anyway):

Code:

if(document.location.protocol == "file:") {
    try {
        var x = document.implementation.createDocument("", "", null);
        x.load("gcode/g-code.html");
        x.onerror = fixup_urls;
    } catch(err) {
        fixup_urls();
    }
}

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

6 years 8 months ago #158255 by phillc54

Replied by phillc54 on topic ISO for a sysvinit distribution

A grep of the docs source folder shows a lot of direct links to linuxcnc.org so I don't think it would be possible to eliminate them all.

Please Log in to join the conversation.

BeagleBrainz
New Member

6 years 8 months ago #158259 by BeagleBrainz

Replied by BeagleBrainz on topic ISO for a sysvinit distribution

That snippet comes from doc/html/gcode.html
If firefox that snippet

Changing that snippet to

Code:

if(document.location.protocol == "file:") {
    try {
        var x = document.implementation.createDocument("", "", null);
        x.load("gcode/g-code.html");
        x.onerror = fixup_urls;
    } catch(err) {
        fixup_urls();
        alert (err);
    }
}

I get "TypeError: x.load is not a function" message using fire fox.

It only happens if the protocol is file://
Only my local weberserver it works fine.

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

6 years 7 months ago #161069 by phillc54

Replied by phillc54 on topic ISO for a sysvinit distribution

I really don't have time to support these images and I intend to remove them at the end of March so if anyone wants them the time is now.

I am going to follow the crowd and move to Rob's Mint images and hopefully they will end up being the official LinuxCNC images.

Please Log in to join the conversation.

BeagleBrainz
New Member

6 years 7 months ago #161072 by BeagleBrainz

Replied by BeagleBrainz on topic ISO for a sysvinit distribution

Well phill you work hard enough as it giving back to the community.

And what happens when I finish fighting with my employer and either get back onsite or have to start looking for work.:laugh: :laugh: :laugh: :laugh:

Apparently I'm not fit enough to get assigned jobs but fit enough to be left on the books. Hopefully FairWork comes up with a solution.

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

6 years 7 months ago #161075 by phillc54

Replied by phillc54 on topic ISO for a sysvinit distribution

BeagleBrainz wrote: And what happens when I finish fighting with my employer and either get back onsite or have to start looking for work.:laugh: :laugh: :laugh: :laugh:

Apparently I'm not fit enough to get assigned jobs but fit enough to be left on the books. Hopefully FairWork comes up with a solution.

Crikey, the way things are going at the moment we won't be allowed out to go to work. I guess the'll have Corona Cops on every corner.

Please Log in to join the conversation.

twoflowers
New Member

6 years 7 months ago #161356 by twoflowers

Replied by twoflowers on topic ISO for a sysvinit distribution

It's a pitty that you stop on the images. Did you nutld them with devuan sdk? Any nifty config to be done?

Please Log in to join the conversation.

phillc54
Topic Author
Offline
Platinum Member

6 years 7 months ago #161373 by phillc54

Replied by phillc54 on topic ISO for a sysvinit distribution

Nothing fancy, I just used the Refracta Tools

Please Log in to join the conversation.

Time to create page: 0.227 seconds